School repair >bidets

Any plumber has the property sooner or later fail. Sometimes the cause is not a very high-quality parts, but the most often the failure caused by the exploitation of children. Typically an integer device failure is not in and of itself, and begins to leak out, without compromising the customer prior to a choice: to cause the marriage certficate (if is available refrigerator or repair plumbing fixtures in the apartment on their own.

The second option would more quickly and to the same reliable, don't you do all the work "as for themselves". If you have already faced and elegantly problems or do you want to be secure in the event of occurrence, our article is for you. We will look at the most frequently encountered issues and methods for their solution.

Water flowing from a crane in the closed position

If the closed crane water continues to leak, then, is broken or worn seal. You want to make repairs mixer for bath. You need to buy a new part.

The shims for a crane there are 2 types:

• Rubber - for cold water.
• Leather - for hot water.

The process of replacing the seals:

1. Shut off valve on the site with a defective crane;
2. This profitably the balance of water in the tube, with the integral will be checked, if you have fully closed valve (crane leave in the "open" );
3. Shoot plastic plug.
4. Twisted screw and remove the handle.
5. crown valve with a wrench counter-clockwise.
6. On the edge of the received design there is a spacer, closed with nut.
7. Changing the gasket with a new, securing with the nut.
8. A crown put in place, lightly manually, and then won't miscalculate with a wrench in a clockwise direction
9. Set the handle in place.
10. crane;
11. Open the valve.

The Council! If the nut, holding the seal does not unscrew past, must be moist with its liquid engine oil or kerosene.

Water leak near the handle

If the water is leaking at the level knob, then, in your crane seal is leaking.

To fix the problem is changing its the foam.

1. Shut off valve.
2. Disassemble valve, as described in the previous case.
3. With an awl or a narrow screwdriver derive the old the foam.
4. fling a new packing in a clockwise direction (in the same direction are wrapping r bushing);
5. Each new twist using a screwdriver.
6. Tight nut in place.

As the foam can be used:

• The rope foreheads.
• Crochet ;
• cord;
• Cotton cord.

To improve the water resistance the foam slightly wets the kind.

The Council! Before replacing the foam you can try less radical way - retighten nut wrench hand crank crane.

Poorly passes water

If the water in -, kitchen sink or bath bad passes, then siphon blocked fats or small-scale example.

Siphon is a part of each minor device and is required for the establishment of water, the shutter is not carrier (gases and odours from sewage pipes in the room.

Siphon cleans the following ways:

1. Hot marinade siphon high pressure washing hot water. You can pour in the drain hole 1 tablespoon of submerge caustic soda, and then pour hot water per liter.
2. The edge of the lube with petroleum jelly or cream, sink or bath give water, jerky is pushed on the top-down.
3. In the inlet vacuum cleaner unfoundedly wet the cloth, he puts as much money to the drain port and include the device for a few minutes.
4. If the above methods do not help, it is necessary to dismantle syphon. The syphon activist additional dynamization and Hermitage been opened? the plug. The syphon cleans with a wire, curved at the end in the form of a hook. You can clean and cable steel wire with a diameter of 3-4 mm, however, such a method cannot be applied to plastic, brass and chrome .
5. If cleaning siphon is not helped, you will have to be cleaned out all the cable tube. To increase the number of trapped debris by the end of the cable firmly tied a cloth.

If the plugged toilet, stuck debris can be pushed an empty plastic 2-liter bottle. Pushing sharp advancing movements, by sending in depth tube part of bottles with cover.

Repair drain tank

With the passage of time the drain bottle can start leaking.

For the repair shall carry out the following steps:

1. Shut off the valve and remove the reservoir cap.
2. Carefully examined its internal elements.
3. If any of the parts are damaged, you should get a new (before you go to the store, don't forget to find the bottle manufacturer name, model, or type the drum and the year of production - all of this will help your vendor to find a suitable part);
4. If the seals are worn, they are changing.
5. The float valve will disengage from a sharp, but not too strong, the movement left with wrench or pipe wrench.
6. All of the parts bottle PGC sliders plastic brush and colded water ( parts slowly, without memorizing their location);
7. Hard deposits on the parts removed a wooden spatula.
8. Cleaned parts shall establish in its place (as in paragraph 6, only in the reverse sequence);
9. Thread handle with silicone brush with dense pile.
10. If the old float loose on the surface, it makes it easier when assistance foam.

The Council! The time to repair the reservoir cap is placed in a safe position, the best on the floor, outside the children's access. The cover is not sold separately, so that in the event of damage you will have to change the entire pig (or open the reservoir).

REPULSED all rights reserved.

If enamel beaten back slightly, it can be reset by itself (for more information about - in article Repair acrylic bathtubs).

To do this perform the following:

1. Clean damaged area with fine emery cloth.
2. PGC sliders surface with petrol.
3. Cause five layers of glue CHEMICAL-ENGINEERING-2, allowing each to dry completely.
4. Homage surface suitable for color Zellige with paint or zinc it was executed from memory (the thickness of the layer thickness is equal to glue);
5. If the surface became too rough, repeating the procedure.

Conclusion

These are the basic principles for repair toilets - are often an integral part of the toilet their hands, which can be applied on its own even for first-time DSLR users.

If the failure occurred more serious nature than a small leak or obstruction, should contact the professional structure of in order to avoid flooding as its headquarters, and neighbors.