The Table of Contents
Today, we take a look at a few popular on the Internet, such as the repair doors their hands.
In spite of the small number of available in a network of information, this problem has been and remains very relevant.
Customer self repair in the small room diversity doors, proposed to today's construction market, raises the growing number of problems that arise in the process of their multi-year exploitation.
Data problems and ways to resolve them we have and we will try to highlight how you can learn more in this article.
Making repairs in its housing, it is not necessary to forget about such an important element as well as interior walls.
Them in any home or apartment is always the majority, therefore, repair doors their hands is not only possible, but also necessary, if your purpose is to restore external and operational performance doors without unnecessary financial costs.
So, if you want high quality finish apartments their hands, what, then, are types of doors in the apartment the most prevalent?
Depending on the material used for the manufacture, the doors are divided into the following types:
On the basis of opening, the most frequently encountered the following types of doors:
The next, and the than will focus our school repair, install doors and especially their repair, depending on the type of doors.
Replacing wooden door hinge
The old wooden door from all types of doors require, perhaps, the greatest attention.
They have a tendency to sag over time, which are poorly dig into, may crack, as well as the often have problems with the hinges and neutrino states door box (the hinged wooden doors).
Let's take a look at what measures in each of the cases described you can take. Door drops occurs due to wear axs on the hinges.
To correct such a situation can be two ways:
If wooden door, over the years, or cracked - not a misfortune, to change the situation will help the restoration and repair doors. For this the door removed and set on a flat, rigid, an elevated surface.
Shoot old coating - varnish or paint, using solvent or with emery cloth. Have vexed the special mixture to tree all door cracks using the spatula.
Please Note! Produce fine grit sanding door surface with emery paper. And, depending on the cover, are detrimental to the door layer segment, and then paint, or surface and cause 2-3 layer paint. And the gearbox has been doing the same.
If the door is so lucky that some, where even Alexander Kim, it is not based on satellite imagery for the repair door, it has lost its reliability. The best solution is to buy new.
If you have any problems with the hinges should be re-secured. If the cavity under the self-tapping screws are loose, it should be unscrew the old bent self-tapping screws, lubricate with glue socket and new self-tapping screws, screw the past in place and leave to dry.
Install doors
If the problem is in the cells, it is necessary to loop, slightly by moving it up or down on the old position. Before you mount the new location should be to prepare a hinge with a chisel.
Bent door box, resulting in no longer tightly closed the door, but it is quite Pakhtakor. For the beginning it should remove the door, and then, using construction level align the box and secure the flat position, placing props.
Further to the inside of the box in the left-hand and right-hand side of the desk-top doing holes through the box, marvelous places in the wall is not less than 5 cm.
Holes must be 2 on each side, one on top and bottom. In the formed holes should be breaking wood or metal pins (wood should be lubricated with glue).
It should be borne in mind that if you have been installing doors - repair or prevention should be at least 1 times a year.
You want to inspect the door for small faults, to be able to prevent a major breakage. Retighten self-tapping screws in the hinges and screws on the door handle, lubricate hinges, to avoid the grating noise.
The continuation of topic stop at the glass products. Such a view doors are mostly used in rooms with high humidity - kitchen, bathroom, toilet.
Repair glass doors mostly required when problems with door lockers or when damage glass facade. In the second case will only ordering a new glass door exactly the same size, with follow-up replacement of damaged door.
In the case of a hinge faults must be the first case to determine its cause. It is possible, simply any screw or adjustment is required. In any case, more horrible outcome, rather than replacing the door hinge, you do not face.
And the door may be used, if you decide to deliver high quality finishes furnished lanai with their hands.
Repair aluminum door is associated mainly with replacement handle, adjustable hinges, locks with grease, and setting flap geometry. In the latter case, you need to re-install the door aluminum design.
The remaining options are not so complex. If the type of door lock has broken down the barrel, his replacement is in the same manner as in conventional doors.
If a door is not properly closed, you need to replace the rubber seal or ? check loops, which, it may be necessary to tighten or grease. If the hinges have reached the end of their working life, need to be replaced.
Lathe design high rigidity makes loops
The next topic, which will consider our school repair - door input, their faults and repair methods.
If your entrance doors are made of wood and are akin to street, the repair is different from repair wooden doors in only one - input the wooden doors must be covered with water-repellent paint or paint, otherwise the factors the environment they simply .
However, if the door metal (the so-called ), the classical problem is usually a poor fixtures, in most cases handle, which may simply .
The Council! Installing the metal entrance door, be sure to equip its qualitative European lockers, with which you will not know problems for many years.
We hope, that it is now repairing doors their hands you will be the exact under the force. And don't forget that a good a good door can become a reliable barrier on the road to corporate your "fortress".